FKASA - Official Portal

FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES

Consultancy & Technical Services

DSC 5398
 

Below are the services offered by FKASA :

STRUCTURAL TESTING

Type of testing :

1.0 Tensile Test
1.1 Tensile Test on Reinforcement Bar
1.2 Tensile Test on BRC
1.3 Bending Test
1.4 Bending Test on Reinforcement Bar
1.5 Bending Test on BRC

CONCRETE TESTING

Type of testing:

1.0 CEMENT
1.1 Setting Time
1.2 Standard Consistency
1.3 Tensile Test
1.4 Mortar Compressive Strength
1.5 Flow Test (Mixing + Testing)
1.6 Compressive Strength of Mortar (Mixing + Moulding + Curing + Testing)
1.7 Compressive Strength of Cement (Mixing + Moulding + Curing + Testing)

2.0 COARSE AGGREGATE
2.1 Sieve Analysis Material Passing 0.074mm Sieve
2.2 Water Absorption & Specific Gravity
2.3 Ten Percent Fine Value Test
2.4 Aggregate Impact Test
2.5 Aggregate Crushing Value
2.6 Aggregate Flakiness Index
2.7 Aggregate Elongation
2.8 Surface Moisture
2.9 Sodium Sulphate Soundness
2.10 Grading of Aggregate
2.11 Unit Weight
2.12 Chloride Content Test
2.13 Sulphate Content Test
2.14 Clay and Lumps

3.0 FINE AGGREGATE
3.1 Silt Content
3.2 Water Absorption & Specific Gravity
3.3 Sieve Analysis
3.4 Bulk Density
3.5 Alkaline Reactivity
3.6 Flakiness Index
3.7 Chloride Content Test

SOIL MECHANICS & GEOTECHNICAL TESTING

Type of testing :

1.0 CLASSIFICATION TESTS
1.1 Moisture content
1.2 Atterberg limits:
1.3 Linear shrinkage
1.4 Particle density
1.5 Particle size distribution

2.0 TOTAL STRESS TESTS
2.1 Unconfined Compression Test (UCT)
2.2 Unconsolidated Undrained Triaxial Compresstion Test
2.3 Consolidated Undrained Triaxial Compression Test (up to 3 days)
2.4 Consolidated Drained Triaxial Compression Test (up to 4 days)
2.5 Direct Shear Test
2.6 One Dimensional Consolidation Test
2.7 Permeability test
2.8 Compaction-Related Tests - 2.5kg Rammer
2.9 Compaction-Related Tests - 4.5kg Rammer

3.0 FIELD TEST
3.1 Mackintosh probe (to depth no exceeding 15m below ground level or 400
blows per 0.30m penetration)
3.2 Field density test (Sand cone)
3.3 Core cutter

HIGHWAY & TRAFFIC ENGINEERING TESTING

Type of testing :

1.0 AGGREGATE
1.1 Particle Size Distribution of Coarse Aggregate
1.2 Particle Size Distribution of Fine Aggregate (Sieve)
1.3 Specific Gravity / Water Absorption of Coarse Aggregate
1.4 Specific Gravity / Water Absorption of Fine Aggregate
1.5 Aggregate Crushing Value
1.6 Aggregate Ten Percent
1.7 Aggregate Impact Value
1.8 Aggregate Abrasion Test (L.A)
1.9 Aggregate Flakiness Index
1.10 Aggregate Elongation

2.0 BASE & SUB-BASE
2.1 California Bearing Ratio (CBR) - Unsoaked
2.2 California Bearing Ratio (CBR) - Soaked
2.3 Moisture Content
3.0 BITUMINOUS MIX & BINDER
3.1 Pavement Coring – 100mm
3.2 Pavement Coring – 150mm
3.3 Binder Content Determination
3.4 Marshall Stability and Flow
3.5 Complete Core Analysis
3.6 Marshall Mix Design
3.7 PSV
3.8 Penetration Test
3.9 Skid Resistance
3.10 Ring & Ball

4.0 IN-SITU TEST
4.1 In-Situ CBR Test

ENVIRONMENTAL ENGINEERING TESTING

Type of testing :

1.0 pH Testing
1.1 Biochemical Oxygen Demand (BOD)
1.2 Chemical Oxygen Demand (COD)
1.3 Oil & Grease (O&G)
1.4 Total Suspended Solid (TSS)

 

For more information, please contact :

  • Tn Hj Muhammad Nurul Fakhri bin Rusli (Head of Technical) - Tel : +6095492251
  • En Mohd Safwan Rizal bin Saripudin (Assistant Administrative Officer) - Tel : +095493006

Print